Jacquard elastic is increasingly more prominent to using in life with its attractive, functional, environmental management and also other roles. Style is now an extremely prominent feature of garments. And also this fashionable expression, indivisible from the use of flexible jacquard.

However, many jacquard elastic band will be deformation after couple of times washing. So what are the factors that trigger the contortion? Below are some aspects that are evaluated by Amanda Textile Firm:

First, the textile product, if the product of the fabric does not match the material of the jacquard rubber band, the shrinkage rate will certainly be various.

Second, the production procedure, if the jacquard elastic band supplier band usage in the collar ring, sleeve ring and also various other components of the curvature is reasonably large, which will cause contraction.

As a result, we suggested that the shrinkage test can be executed with expert devices to establish whether it will certainly be caused by the above first factor. If so, try to prevent washing. You can likewise make use of the webbing to sewing with garments and screening to see to it that each process goes efficiently. If the water washing test discovers deformation or creases, it is required to quickly replace various other sorts of webbing or materials to stay clear of the succeeding contraction of the above items and affect the sales of the items.

Jacquard webbing will certainly provided some troubles such as in the manufacturing procedure, leading to unqualified item inspection, so how to find and also change it?

First, WAVE
The reasons for wave formation are:
The steel clasp is not uniformly threaded, and most of the two sides are used, but the center is put on too little.
The steel clasp is put on way too much and also the weft is pulled also tight.
The pan head pulls the thread improperly, both sides are drawn tightly, and the center is drawn too loose.
The thread signing up with approach is incorrect, and the equilibrium is not good.
Precaution:
Usage typical steel clasps as well as use them in teams of 1 or 2.

According to the width of the webbing, select the steel clasp to wear.
Modification the center and the two sides of the yarn pair to the same strip, or draw the middle looser.
According to the weaving method, it is required to get and push the pressure to average the variety of bars.

Second, CAURVED BELT
If there is a curved band in production, it will undoubtedly impact the subsequent order manufacturing, increasing the problem of coloring and also finishing.

The reasons for forming a bend are:

The steel fastening is not uniformly used;
The warp thread is unevenly elastic;
The steel clasp is in the wrong setting;
The thread signing up with technique is not equivalent.
Safety measure:
Steel fastening wear need to be in accordance with the formal approach;

The elastic warp is unequal. If the warp result of the frying pan head is different, it will impact the straightness of the material, usually with the loose side of the body.
The individual twists the upside-down to create the bent belt, the steel fastening is generally the weaving range, and there is a steel clasp empty distance.
According to the requirements of the webbing, it is often divided into layers, or points, left and also right, typically have to be divided into top and reduced, if there are more than two methods or lines on a belt, they have to be separated.

Third, THE SIZE IS NOT THE SAME
The size of the material such as jacquard webbing is basic with the consumer's requirements as well as is controlled within an allowed upper and reduced deviations, yet the size does not constantly appear throughout the weaving procedure. For instance:

The side of the chain or the side of the steel cable is misaligned. The feature of the side of the steel cord is to stabilize the thickness of the fabric on both sides of the body during the weaving process, to ensure that the device diminishes uniformly and improves the bending sensation. If the steel cord uses me or One much less space. The width change is a lot more noticeable;

There are obstacles in the outlet. If the setting of the line is incorrect, if there is an issue in a specific placement or an issue with the weft, it will trigger barriers in the weft thread and also influence the width.

The density of the weft product is irregular. The rayon as well as cotton yarn are very easy to pass. Thick or slim, directly influencing the size.

Amanda fabric has its own strict production process and also QC control. In the process of manufacturing, it can find issues as well as deal with problems in time. For that reason, our rubber band and also webbing issue price have been really reduced.